The latest update shows the card keel that was added to the model. The keel was built from three separate pieces of 1mm thick card - it was easier to cut the profile in three parts rather than try to cut it out in one.
The main piece runs from the bow, level with the deck to about 3/4 of the way under the hull, The rear section is about 10mm long and ends in the Anal Fin and the small addition to the very front is just 5mm tall.
All of the individual parts were coated in superglue before being cut and sanded to shape. As you can see the small addition to the bow has still to be sanded back (to reduce the gloss finish of the superglue). Any gaps were filled with the filler/uPVA glue mix.
The Hammerhead Shark head has also been coated with the filler/uPVA glue mix and then sanded smooth.
Tony
No comments:
Post a Comment