Friday, 6 April 2018

An Industrial Narrow Gauge Adventure - the layout part thirty-three



These latest images show the progression so far on this low-relief, back scene building for my small shelf layout. The model is built to the rather unusual scale of 1/27.7 or 11mm = 1 foot which represents 18 inch narrow gauge running on standard HO-OO or 16.5mm Peco Crazy Track. For more details see the Narrow Gauge or 1/27.7 labels to the right. Or browse the earlier Industrial Narrow Gauge Adventure headings.

Since the last post, I have painted the exposed wooden panels and the black tar paper covering. The wooden sections were individually painted with acrylic paints following some tutorials found on the Internet showing worn and decaying wood while the tar paper has been painted in off-black colours with some streaking.


In the final image you can see the exposed wooden structure in greater detail. The technique I have used is to paint the wooden structure in watered down acrylic paints, drybrush the exaggerated wood grain and then use washes to highlight the sculpting. Extra colour was added with watercolour pencils which are sharpened to a very fine point - a slow and laborious process but one that I feel portrays exposed wood in a very realistic manner. The external telephone bell was copied from another image found on the Internet. It is scratch-built from sections of plastic rod and thick plastic card. The wiring is fusewire.


The next job will be to paint the wooden stays or supports that hold the tar paper in place and painting the fibreboard roofing panels.

Tony

Tuesday, 3 April 2018

An Industrial Narrow Gauge Adventure - the layout part thirty-two



Unlike the brick built base of the Salt Pan (see earlier posts) the brick wall on this part of the layout was impressed into pizza foam (the foam that you find as backing to frozen pizzas). The painting was done over a thin layer of cream and grey acrylic (the mortar) and then the orange/red brick colour was drybrushed over the bricks. The finished effect took many layers of red, brown and orange drybrushing but I think the effect was worth while. Once fully dry, individual bricks were picked out with a fine pointed brush in darker black colours and lighter white.

The whole wall has been washed in different coloured washes and I have used watercolour pencils to highlight some bricks as well as produce the simple graffiti.

The metal door was painted in greys with rust effects on the lower edge and some more watercolour pencil detailing on the door furniture. The door design and colour was copied from a similar door I had seen on the Internet.


The final image shows the low-relief building against the office wall to show the effect I was looking for.

Tony

Monday, 2 April 2018

Malvern Flea Market



Earlier this morning, Sue and I visited the Malvern Three Counties Showground Flea Market. This was the first time I had been to this event (I had previously attended the Toy Fair and Vintage Car Show). It is quite a big event filling most of the inside halls and overflowing on to the open air hard standing. My own purchases were few and cheap. a book called Saunders and Saro Aircraft since 1917 by Peter London.

We were on our way back home by mid day and are now looking forward to an Easter Monday lunch with our daughter Holly.

For more details of future and planned events see this link.

Happy Easter.

Tony

Saturday, 31 March 2018

Happy Easter



A very Happy Easter to all my followers and readers.

Tony

Wednesday, 28 March 2018

An Industrial Narrow Gauge Adventure - the layout part thirty-one



In this update I have added the roof and barge boards plus some small detailing to the tar paper and supporting strips of wood. The next step will be painting.....

The last two images show the low relief back scene against the office wall - which gives an idea of the effect I am looking for.



Tony

Monday, 26 March 2018

Airfix Beam Engine - part two



Following on from this earlier post I have added a 1/27.7 (or 11mm = 1 foot) workman to the Airfix Beam Engine model and think it works better than the 1/56th or wargame scale figure shown in the original post.

The original model was sold as either a 1/32nd scale or 1/45th scale model so seeing it alongside a 1/27.7th scale figure seems to work. The workman is a heavily modified 1/24th scale figure and is available to purchase as a resin figure from me - see this link for details.

Tony

Saturday, 24 March 2018

An Industrial Narrow Gauge Adventure - the layout part thirty



The next stage in reproducing the low-relief back scene building was to add the wooden retaining strips that hold the tar paper in place. These were constructed from thin strips of scrap wood about 2 - 3mm wide and glued in place with superglue. Prior to fixing them in place I used coarse sandpaper to add some wood grain texture along the lengths.


The two short ends were modelled in a similar manner.


Tony