Sunday, 27 July 2008

Flash Gordon - Gorillapoid

The Gorillapoid (I think that's right - the Buster Crabbe, cinema 'cliff hanger' series has an Orangapoid) is based on a toy gorilla with a resin horn and some 'green stuff re-modelling to the face (to make it look a little more fierce). The model is re-painted, but this is more of a touch-up rather than a complete re-paint.

The model stands over 80mm tall (base of knuckles to top of horn). This second photo shows the Gorillapoid next to a 40mm Ming Guard figure for scale.


Tony
PS. If anyone can come up with a better name - please feel free to post your suggestions.

Tuesday, 22 July 2008

Flames of Herakleitos by Bob Lock

I am pleased to support this author, who is also from my home city, (or town as I will always think of it) Swansea - Bob Lock.

This is his first published book although he has had other work printed in anthologies. I read the book last year on a long flight to Thailand and thought it a riveting good read, part Fantasy, part Sci-Fi.

More information at;

Sunday, 20 July 2008

Archibald

Just a bit of fun! I picked up this miniature at the Games Expo, Birmingham in 2007 and mounted and painted it as an adventurer for my daughter.


Mounted on a 60mm round wooden wheel with the ground work built up from sand, cork and a 'bargain bin find' of a treasure chest.

The figure is painted with acrylic paints over a black undercoat and varnished with matte acrylic artists varnish. The base is painted as a Caribbean beach with ground foam vegetation. While the name plaque is a piece of card cut to size with two plastic rivets, the script is from a Games Workshop transfer sheet.

The figure is called Archibald and stands 46mm tall. Great fun!

Tony

Flintloque - Black Brunswickers

This is my latest Flintloque regiment to be finished. It has quite a history! The eight figures are a 'miss-match' of Flintloque blisters and box set extras that have accumulated in my spares box over the last few years. Each miniature has been converted with added cuffs, enlarged shakos or coat detail and were original re-modelled/sculpted with brass plates and large plumes on their helmets. I had even started to paint them, with dark blue coats and red trim!




The Brunswick 'Deaths Head' motif was sculpted with 'green stuff', the plume cut off the tops of the helmets and a small button of 'green stuff' added. The figures were undercoated black and painted with acrylic paints. The black coats being highlighted with dark grey and the cuffs and detail painted sky blue.

The first photo shows the whole group of eight figures - two Ogres, one Dog Soldier and five Dwarves. While the second photo shows the non-dwarves and the third just the dwarves.

They are quite dark in colour, which I think contrasts well with some of my 'brighter colour schemes'. The whole group has taken a great deal of time from conception to finished regiment (maybe three years!) But I am pleased with the end result, although the Dog Soldier does look a little too dark in each of these photos.

Tony
PS. I have a number of Flintloque regiment that include miniatures of mixed race - Dwarves with Ogres, Dwarves with Dog Soldiers etc. I think they work very well with the difference in figure size adding to the overall effect.

Saturday, 19 July 2008

Flash Gordon - Sharkman

The latest addition to this Blog is a Reaper Miniatures - Wereshark (number 02890) sculpted by J. Wiebe and painted as a Flash Gordon Sharkman.


This is a very fine miniature from Reaper Miniatures, a miniature that fits in perfectly with my Flash Gordon collection and a miniature that was an absolute joy to paint.

The model comes as a multi-part casting; main body, left arm and tail. The left hand is a bit 'static' and could have been better animated. It was constructed with superglue and mounted on to a 40mm round base before being painted over a black undercoat. I have also seen the same miniature painted as a Great White Shark with a white and light grey scheme, that I hope to copy one day!

My colour scheme of dark blue with royal blue highlights and gloss varnished was inspired by an Internet search. I am very pleased with the finished model, but still think a Great White will be added to the collection one day.

The miniature is 60mm tall from foot to top of fin.

Tony

Friday, 18 July 2008

Flintloque - Large Farm House part four

This latest batch of photos continue to record the progress so far. The walls have been 'plastered' with White DAS modelling clay, which is added in small bits - about the size of a piece of chewing gum, over a brush coat of PVA glue, then when the section is completely covered I use a modelling tool to smooth out the clay and then start the texturing. The modelling tool produces a realistic hand-plastered finish while a large stiff brush dipped in water produces a smoother look.






I think the photos show the technique better than words! As you can see I like to have a very textured surface. I also leave a couple of bits of the original black foam board to show through, more about this when I begin painting.

The steps at the front of the building were built up with foam board, glued and pinned before being covered with DAS.

For the wall 'plastering' I use DAS that I have added a little water to, it helps with the smoothing out and texturing.

This final photo shows the annex and in particular the thatch. I thought it would be easier to add the thatch to this smaller roof section first and allow me to demonstrate the technique in greater detail. The DAS modelling clay is spread (quite thinly) over a base coat of PVA glue and shaped with a modelling tool to form the thatch shape, the overhang of thatch is modelled on with a sausage of DAS rather than the thatch being that thick! Once I am satisfied with the shape I comb the DAS with the blade end of the modelling tool. The end of the thatch is textured with a blunt cocktail stick - poking the point in to the clay to produce the effect. (At some stage I will take a picture of the tools that I use to help other who wish to copy this technique).

The photo also shows the level of texturing I like to aim for and the black foam board showing through. For sections near the balsa strip I have used the original tool and a much smaller sculpting tool which fits between the beams.

Progress to date has taken about a week of evenings, working about one hour - two hours each evening. Please Note; you have to leave a great deal of time for the PVA glue to set and the DAS to harden.

I try to coat all surfaces that are to accept DAS with slightly watered down PVA glue - I have not had any nasty experiences with the DAS flaking-off, but once read that DAS can shrink if not treated in this way.

Tony

Wednesday, 16 July 2008

Flintloque - Large Farm House part three

These latest photos show the main structures complete, joins reinforced with paper strips, the wooden beams added and the first chimney modelled from blue foam.






In greater detail; black foam board has been used to build the main structure shapes and internal strengtheners, thin card has been used for all the roof sections and the torn paper strips have been used to strengthen all joins - torn paper and PVA glue. Roughed-up strips of balsa wood have been used for the wooden beams. The blue foam off-cut has been shaped with a large knife, sanded to shape and then individual stones cut in to the chimney with a scalpel and further textured with a broken stone, pressed in to the foam. The chimney has been glued to the roof and wall with PVA glue and dressmaker pins have been added to strengthen the joint.

You may also be able to see where I have started to 'plaster' the first wall with DAS modelling clay - more detail to follow in later posts.

These latest photos also show the rear of the house and you can now see the annex and two additional window - all construction as previous posts.

The farm building is 180mm long and 140mm tall (to the top of the chimney).

Tony