Saturday, 9 September 2017

Aircraft of the Fighting Powers - a charity shop find



Sue and I had a morning at Avoncroft Museum yesterday and after we had browsed the display buildings and exhibitions we drove into Bromsgrove where Sue found this second hand marvel - Aircraft of the Fighting Powers volume V from 1944.

It was for sale at just £1.99 in a charity shop.


Over 70 fully illustrated and beautifully drawn scale plans with accompanying details - a real bargain. Here are just a few of the scale drawings included in this book.




Tony

Friday, 8 September 2017

Von Mohnblume Line - part three



I added Milliput to the 2p coins to blend in the metal bases. As you can see I have added small Milliput stones to the groundwork as well as a tiny piece of customisation - Milliput buttons to the Pugs uniform cuffs.

Tony

Thursday, 7 September 2017

Von Mohnblume Line - part two



Part one - The miniatures needed very little cleaning up so I sanded the base bottoms smooth and mounted them on to 2p coins with superglue and accelerator. This is my preferred basing style and my only concern was should I have used a 1p coin (as the little Pugs are not that tall). I choose to stay with the more usual 2p.

The figures were sculpted by Rob Alderman  of Hysterical Games and are available in various configurations from Alternative Armies. I choose the Skirmish Pack of 10 random miniatures.

The next step is to detail the bases.

Tony

Tuesday, 5 September 2017

An Industrial Narrow Gauge Adventure - test #8 - the first driver figure



The Feldbahn featured in this earlier post needed a driver, a 1:27.7 scale miniature that would fit into the cab and look like he was actually driving the engine. I used a 1/35th scale tanker that I had seen in Military Modelling as inspiration for the pose and started the sculpt.

Image Two - The converted miniature showing the original cream plastic, Milliput and Green Stuff that was used in the conversion.


Image Three - The mini at the same stage of construction, shown from the rear. This figure is clothed in a one-piece boiler suit, rather than dungarees (as seen on the earlier figures see this post for more details).


Image Four - The nearly completed figure alongside the original 1:24th scale plastic figure that was bought from e-bay.


Image Five - The finished driver. Note the long sleeves and the flat cap now undercoated in grey acrylic paint.


Image Six - Engine Driver No.1 fully painted, although, I'm not happy with the gloss sheen. I think I will have to 'matt it' down.


Image Seven - And the final image, the driver figure doing his job. The figure is NOT glued into the cab, but just placed there so that I can A - still modify the Feldbahn (narrow gauge engine) if needed, B - re-paint him with matt varnish and/or C - Have him cast in resin by Rob Alderman at Hysterical Games. Should any reader be interested in purchasing this or the earlier three 1:27.7 scale figures, please contact me at;
dampfpanzerwagon@yahoo.co.uk


Tony

Monday, 4 September 2017

The Von Mohnblume Pugs



My latest purchase from Alternative Armies has arrived. The Von Mohnblume Pugs sculpted by Rob Alderman. For full details of this new regiment see this link.


I picked up the ten miniature Skirmish Pack on pre-release special offer. The cute little miniatures are full of character and I'll be basing them very soon.


Tony

Friday, 1 September 2017

An Industrial Narrow Gauge Adventure - test #7 - painting the loco



With the construction finished, I sprayed the whole engine with Makes Paint Stick (a clear lacquer that is designed for undercoating plastic garden furniture) then undercoated with Halfords grey primer, an undercoat that I believe to be one of the very best available. Remember to buy the plastic primer!!!!!


The bulk of the painting was done with a small portion of sponge, the sponge that is used as packing material for miniatures. I break off a piece and then holding it in a pair of tweezers, I dab on progressively lighter colours - a bit like drybrushing, but using a sponge. I find that this gives a much better transition than using a brush.


The red buffers were painted with an enamel base or undercoat - I find that enamel red is so much better than acrylic red and then highlight with acrylic paint and washes.

The cab interior was painted with two or three coats of watered-down white acrylic paint and then washed with a light grey wash to dirty it up a little.


Weathering was done with some drybrushing, but mainly washes and the rust colours were mixed from various browns and oranges and applied with a No. 2 detailing brush.


When the painting was finished, I spray painted on another light coat of Matt varnish and after painting the areas where the SPA CO LTD would go with Future (Klear in the US) I used White Letraset to add the lettering.

The model was once again matt varnished before final weathering was applied. This was once again done with washes, remembering to drag the washes in a downward direction to mimic rain water streaks. Then I brushed on some rust powders to the rust areas to help define some of the detailing.

In this final image - showing the sculpted driver (more on this figure later), I have used a 7B pencil to add some graphite to the lower running area.

I still need to add the clear plastic card windows, but this can wait until later.


The Feldbahn engine was great fun to both model and paint. I would like to say that it is a great runner, but the Horby 'Smokey Joe' 0-4-0 mechanism is damaged and I will need to buy and modify a second, before I can get it running on some test track.

For more details and posts about this 1:27.7 (or 11mm = 1 foot) Narrow Gauge Adventure please use the Narrow Gauge label to the right.

Tony

Tuesday, 29 August 2017

An Industrial Narrow Gauge Adventure - test #6 The Feldbahn Locomotive



Part One - The construction.

I choose this Feldbahn (narrow gauge railway engine) as my first 'scratch-built' engine. It is based on an image that I found on the PHB BB Creative Community site for full details see this post.

Image Two - The original works drawings were used to produce my own 11mm = 1 foot scale drawings. These drawings are also available on various Pinterest pages.


Image Three - I find it easier to produce these drawings on grid paper, first sketching the model in pencil and then confirming the dimensions with a 0.3mm drawing pen.


Image Four - My first try was not a great success.....


Image Five - But the second attempt was much better. The model is based on a simple Hornby 'Smokey Joe' 0-4-0 chassis.


Image Six - The old and the new alongside one another.


Image Seven - There are one or two modifications to the original design. I added an exhaust (for the paraffin starting engine), a tool box on the bonnet and kept a round view window to the rear. After all this would have been a much modified and long-lived workhorse.


Image Eight - The yellow detailing is 'sticky-back' plastic.


Image Nine and Ten - More detailing. The handles are thin, bent aluminium superglued in place. The buffers or coupling housings are multiple layers of plastic card with a paperclip hook and the headlight was 'scrounged' from a 1/50th scale Corgi truck.



Image Eleven to Fourteen - The roof was constructed from more aluminium sheet curved over the side of a glass jar and detailed with more sticky-back plastic. Most of the upper bonnet detailing was guessed at.





Image Fifteen - With construction finished, I have placed the un-painted model on the section of test track, seen in this earlier post.


The Feldbahn engine is 120mm long (over buffers) x 38mm wide (at the widest point) and 73mm tall (over cab).

The bulk of the construction is white 30thou plastic card (about 1mm thick).

It is built to the scale of 1:27.7 or 11mm = 1 foot so that 16.5mm Peco 'Crazy Track' represents an 18 inch gauge industrial railway. The original Feldbahn engine used as inspiration ran on 500mm gauge track.

For more details of the Narrow Gauge Adventure go to this label.

Tony