Tuesday, 31 October 2017

The Cursed Snuffbox - a tale for All Hallows Eve



Image 'borrowed' from OITW site

It has become something of a tradition for me to write a short story for All Hallows Eve and Craig Andrews to include it on his Orcs In The Webbe site. 2017 is no exception and I present my latest Flintloque inspired short story - The Cursed Snuffbox.

For full details see this link.

Last years story - Dead Birds Don't Lie can be found here.

I hope you enjoy this bit of fun.

Tony

Saturday, 28 October 2017

An Industrial Narrow Gauge Adventure - the layout part seven



Following on from the earlier post. I have mounted a single speaker in to the top of the building blank. The speaker was taken from a transistor radio that I picked up from a charity shop in Worcester. There were no radios on display in the shop, but when I asked the man behind the counter he found a box full of old radios and I choose the SONY model as I thought it gave the best chance of a quality speaker.

I took the radio apart and stripped out the speaker and jack. The rest of the bits were put in to my 'spares box'.

The small round speaker was mounted in to a corrugated cardboard lid and glued in place with my hot-glue gun after I had tested it. As you can see the wires for the speaker exit the structure through the back. The speaker is 60mm wide.

I have started adding individual bricks to the front of the building. These brick slips were bought via e-bay from minaco-streamline101. I purchased three packs of 250 slips, two in Tudor Red and one in Weathered Red. The brick slips are meant for 1/24th scale dolls house modelling and so each brick needed 2 to 3 mm removed before they could be glued in place.

In the image below you can see the first brick slips glued in an arch shape to the front of the brick built building. I used a mix of fine filler and PVA glue to glue the slips in place.


Finally; the inside of the speaker housing was painted black/dark grey as I will be building the metal salt pan above it and I didn't want any lighter colours showing through the open sides.

The scale rule was printed via the internet (see earlier posts) - 1:27.7 or 11mm = 1 foot.

Tony

Thursday, 26 October 2017

An Industrial Narrow Gauge Adventure - the layout part six



The first building I have attempted for the layout is the OSO SALT salt pan (The rectangular building with the iron roof tank on the left of the sketch above). It is closely based on the LION SALT WORKS, Cheshire salt pan, (see the image below) but with the signage turned through 90 degrees and facing the canal.


The main construction of the brick-built base was built from corrugated cardboard (two layers) stuck together with my hot-glue gun and then clad in brown paper and PVA glue.


The internal bracing is fitted for two reasons; firstly to give strength and keep the structure square and secondly, I intend fitting a small speaker into this box so that I can have sound, self contained diesel engine sounds playing on the layout. The full details of which have yet to be worked out.


The cardboard box is 170mm x 95mm x 70mm tall.

Tony

Sunday, 22 October 2017

An Industrial Narrow Gauge Adventure - the layout part five



At long last, the track has been laid and wired.

I have used PECO 'Crazy Track' that is intended for O-16.5, one length was bought from Tennents Trains in Halesowen, the other was spare from an earlier layout. The single Y turnout came from the same earlier layout.

I have removed a number of sleepers and re-spaced them to be about 50% wider than originally modelled. The turnout was left as standard, although one of the metal connectors proved to be a right pain to fit and I ended up using a big flat file to smooth the running edge.

The turnout lever was taken from a Wren turnout that I bought second-hand. I had wanted it workable, but the throw from of the Wren turnout was too short for the PECO one and so it is purely decorative. The mechanism is operated by the upright nail (to the front) which I will model as a turnout sign.


I wanted the track to be partially buried and have used DAS modelling clay to build up the groundwork to be almost level with the top of the PECO sleepers.

I should note that the track has NOT been pinned, I have glued the track in place with PVA glue and added plastic connectors to each end of the track (I don't want the scratch-built' engines to accidentally run off the ends).

The track has been laid onto 1mm thick light grey mounting card that I had spare.


Hopefully, more to come soon.

Tony

Thursday, 19 October 2017

Blog View count

In May 2010 I added a Blog view counter to Dampf's Modelling Page. The count to date is now over 990,000 page views and with daily views in the hundreds, I would expect the number to increase to one million before the end of the year.

I'm racking my brain to think of a suitable competition or prize draw and will be posting details soon.

Thank you for the support.

Tony

Wednesday, 18 October 2017

Dido, Queen of Carthage at The Swan



Last night Sue and I went with Holly to The Swan, Stratford-upon-Avon to see Dido, Queen of Carthage by Christopher Marlow.

This was the first time I had seen this play, in fact I knew nothing about it until I started reading the synopsis prior to visiting the performance. For details of this ground-breaking performance see this link.

Once again a breathtaking performance and a play that really made you think about power, migration and being homeless. In the question and answer forum after the play had finished it was pointed out how Africa at this time was a true Matriarchal society, with female heroines and leaders (Dido), while the Roman Empire (that followed) was Masculine. We also had an insight into the life and works of Marlow, an Elizabethan character that raises more questions than answers.

The best word I can use to describe the performance was intense! Another great night out, but I have to admit to liking and being more moved by the earlier Much ado about Nothing at the Globe, London that Sue and I saw earlier this month.

Tony

Monday, 16 October 2017

An Industrial Narrow Gauge Adventure - the layout part four



I have started to wire the layout and added a RELCO unit which I had spare from an earlier project. The RELCO is fitted with a cut-off switch which will be accessible from the rear of the layout.

In addition, I have added a strip of wood and some more 3mm thick plastic card to the top of the back scene as I felt it was a little too short.

So far most of the construction and parts have come from discounted kitchen doors, spare equipment (from an earlier layout) and my spares box. The cost so far has been minimal.


Construction has been a little slower than I would have liked, but at least it is moving forward.

Tony