Friday, 8 August 2008

Flintloque - Large Farm House part ten

When I started this modelling project I never thought it would go on for so long and so many photos! The main construction work is now nearly completed, I still need to base the house and add lots of small detail before painting, but I am very pleased with the work so far.

These four photos show the Large Farm House from four separate angles, which I feel give a good representation of the work so far.

I would expect to add more photos soon, but maybe not so many!





Tony

Flintloque - Large Farm House part nine

It was recently suggested to me that the technique I am using to sculpt the thatch roof could do with a more detailed description.

The project is now at an advanced stage and the final roof is now being modelled. I have therefore taken a set of photos showing the work-in-progress and have added a brief description which I hope will clear up any confusion.

Photo 1 - the DAS modelling clay is spread on over a coat of diluted PVA glue, in small biscuit sized pieces and pressed down with my finger. At this stage I am not trying to shape the DAS, just cover the whole roof.

Photo 2 - I have used a modelling tool to smooth the DAS and ensure that all sections are covered and that the DAS is pressed home.

Photo 3 - I am now adding 'sausage's' of DAS to amend the shape of the thatch and ensure that the organic shape of natural thatch is modelled as accurately as possible,

Photo 4 - the rough shape is now achieved, the roof area is fully covered with DAS and the sides and bottom of the thatch have been 'beefed-out'.

Photo 5 - shows the start of the 'combing action'. In the early stages I comb the DAS down from the apex to the base, later I prod or poke the DAS with the blade of the modelling tool.

Photo 6 - the combing complete. (I still need to model the apex section, this I will do once the DAS has fully hardened).

Photo 7 - although not a great photo, it does show how I model the over-hang of the thatch, I use a blunt cocktail stick to prod the clay in an upward motion, creating texture as well as subtly shaping the still wet DAS.

Photo 8 - shows the modelling tool I have used.

Tony

Thursday, 7 August 2008

Khang Robot on TMP

The Miniatures Page (TMP) is running a workbench article by me called - the Khang Robot with legs, a retro Sci Fi robot from Wargames Supply Dump (WSD) painted with washes and inks.

For more information check out;

http://theminiaturespage.com/workbench/248977/

The 'huge lead article picture' has certainly highlighted all the painting faults! But I did enjoy the project.

Tony

Wednesday, 6 August 2008

Flintloque - Large Farm House part eight

Just two photos this time - an early one showing the foamboard structure very early in the build (all crisp right angles and straight edges) and the second showing the extent of the deformation that has occurred since the building was 'cooked' in the oven.


In this case I think a photo (or two) are worth a thousand words!

Tony

Sunday, 3 August 2008

Flintloque - Large Farm House part seven

In an attempt to save this modelling project I have added lots of 'DAS' to the worst deformed areas of the main house to try to cover-up or re-model the blown shape. In addition I have added the second chimney, again modelled from a 'blue foam' scrap.

In greater detail; The 'blue foam' was roughly shaped with a large 'snap-off' knife' and the over-all shape sanded smooth. Once I was happy with the shape and height I had to carve 'curves' on to the inside of the chimney to fit the deformed wall. (at this stage the chimney was just roughly shaped and touching the existing wall for less that 50% of the area!)

I then used a scalpel and new blade to carve horizontal grooves and small vertical slits in to the blue foam to represent individual stones. The whole technique is time consuming, but very satisfying. When finished the carved wall/chimney looks to artificial and needs texturing. This I do with a selection of broken stones (found in the garden). I press the sharp edges of the stone in to the 'blue foam' which leaves the structure with a much more organic look, but still not finished!

I used 'DAS' to model the broken plaster over the top of the carved stones and to fill the (quite large) gaps. I then tried to even out the deformed walls with even more 'DAS'. The finished chimney is topped off with a section of plastic pen barrel, which is in turn further topped off with a small ring cut from a separate pen barrel. Once I am satisfied with the result I give the whole structure a wash of thinned filler mixed with water and PVA glue.




One point of note - the second chimney is very susceptible to being broken off and so I 'pinned the whole chimney to the main building with cocktail sticks and dressmakers pins. I later added a bamboo skewer in to the top of the chimney - it is pushed down and in to the blue foam for about one third the length of the chimney. The small section that protrudes was used to fix the plastic chimney pot.

Tony

Flintloque - Large Farm House part six

These photos show the thatch on the wooden framed building finished. Once again it was 'White DAS' over white PVA glue and 'combed-out'. The photos give a good representation of the process and the finished result.

In more detail; The plain card sub-roof is first covered with a thin white PVA glue and water mix. I then apply the white 'DAS' in small thin sheets, about the size of a Oreo biscuit. Once the roof is covered, I use a modelling tool to smooth out the whole shape and even add 'sausages' of 'DAS' to the sides and lower portions of the thatch. Once I am satisfied with the shape (this is done by eye after studying actual thatch roof shapes on the internet or historical books) I 'comb' the 'DAS' with a modelling tool, using a dragging action at first and then a prodding action when I am detailing the roof. The over-hang (the exposed section at the bottom of the thatch) is prodded with a cocktail stick in a jabbing motion. I then leave it to dry (or cook in the oven).

Once the main shape is finished and completely dry I add the topping or apex, the bit that covers the top of the roof. The rough shape is modelled with a 'sausage' of 'DAS', pressed in to the existing thatch, then 'combed' with a modelling tool and later trimmed back to the up-turned shape you see. The small indentations are meant to represent the way that thatch is held down by weaved straw or thatch.




You can also see some of the continuing problems I have with deformation following my mistake with 'cooked DAS'.

I am pleased with the finished thatch effect, which should really become apparent once the building is painted.

Tony

Flintloque - Large Farm House part five

"There are many times when a modelling project goes awry. This is one of those." If you study the photos below you will see that I have modelled the thatch on the wooden framed house. This was done with 'White DAS' modelling clay applied over a thin base of white PVA glue and then 'combed' with a modelling tool. So far so good!

I was now getting impatient and because I wanted to model the rest of the roof, I placed the model in the oven, the family/house electric fan oven, something that I regularly do to dry-off the 'DAS' in preparation for more modelling. This time my attention was elsewhere and I am afraid that I either left it in for too long or on too high a setting and when I opened the oven door the smell of burning plastic (from the foam board) met my nostrils. If you study the pictures you will see a great deal of deformation of the structures - the chimney has tilted to one side, the main building shape has been 'blown out' like a balloon and the end wall of the wood framed building is now bowed! I do not think that there is a surviving 90' angle on the whole model.





I was very disappointed and tried to recover the project by forcing the shape back in to the model - the chimney broke off!

It will take some effort to bring this model tutorial back on track! But it at least shows anyone trying to copy the techniques used - DO NOT TO PLACE FOAM BOARD COVERED IN DAS IN THE OVEN!

Tony