Thursday, 22 January 2009

Christmas 2008 Project - The Amber Shrine Board part thirteen

The first two photos show the stonework basecoated and washed. The paint used was Anita's Acrylic Craft Paint and was applied with a large round brush. The next stage will be drybrushing with lighter greys.


The two colours used for the base are un-diluted Burnt Umber 11027 and Charcoal 11086, mixed in a ratio of one part Burnt Umber to five or six parts Charcoal. (The exact mix was varied to give a more natural stone colour). It needed up to three coats to get a good even coverage.

I have also washed the whole structure with a wash of five parts distilled water and five parts Klear, with a spot of flow improver and a dash of dark brown and black acrylic paint.

The paint was bought from Hobbycraft, Droitwich (The Webbs Garden Centre Store) for 95p per bottle - very good value for terrain painting! The basecoating has taken about 3 hours work over a period of one week, as I have had to wait for the paint to dry in the cold and wet weather.

I realise that the whole project is well behind schedule, but I am pleased that it is still moving along and keeping me interested.

Tony

Saturday, 17 January 2009

The Blade Itself by Joe Abercrombie

The trilogy of books by Joe Abercrombie of which The Blade Itself is the first was introduced to me last year by my brother-in-law and my daughter, both of whom raved about the fantastic storytelling. I read book one during the autumn and personally thought it a little slow, however over the Christmas break I started and finished Book two Before they are hanged and the story really takes hold, moving at quite a pace with some very well written battle scenes.

I have now started book three Last Argument of Kings and find myself not wanting to put it down.

A Fantasy trilogy in the same style as The Lord of the Rings, with a gritty, adult text that adds to the quest and story, with believable characters and back stories. I thoroughly recommend all three.

Tony

Wednesday, 14 January 2009

Christmas 2008 Project - The Amber Shrine Board part twelve

The latest post is more of an up-date rather than a full entry. The groundwork has now been completed. I have used two distinct grades - a rough stone scatter, picked up from a building site and a fine sand scatter. Both have been added over a coat of dilute PVA glue and further 'wetted' with a hand spray of water and dishwashing liquid.

Photo One - shows the groundwork in greater detail. In addition you will notice the ornamental urns, which came from the same plastic game set that the horses heads statues came from, one of the urns was split into two with the aid of a hammer and chisel. The plastic pieces do not take glue or paint very well and I have had some issues getting either to stick.

Photo Two - shows the battery housing built in to the base of the tile. The electrical lead goes through the base and up in to the plastic monolith.

Photos Three and Four - show the board with all construction work finished. The next step will be painting.

Tony

Friday, 9 January 2009

Christmas 2008 Project - The Amber Shrine Board part eleven

Late last night and early this morning I was able to do quite a bit to the board. The first photo shows the work-in-progress and taken in direct sunlight - the first time I have been able to do this since well before the start of the Christmas break!

The next four photos show the board from each side, which should give a much better impression of the style and imagery I have been trying to achieve. At this stage I would say that most if not all of the main construction is now finished, I still need to add some more details and the groundwork will need to be completed.

Notice how little of the green flocked tile remains un-touched.

During this phase of work I had one great big issue - when I tried to re-connect the battery to the lights, I couldn't get the lights to work! A couple of minutes twiddling and work with a soldering iron and everything was back on track, but for a time I was contemplating taking the monolith apart to check the electrical connections.

Construction is more 'Blue Foam' sliced into thin 4 - 5mm sheets (in fact sawn with a metalworkers hacksaw blade) and detailed with a scalpel, sanding stick and a broken rough stone, glued down with PVA glue and held in place with dress-makers pins. The groundwork is either ready-mixed filler or DAS.




Tony

Wednesday, 7 January 2009

The Future of Klear

During the Christmas break, I read on one of the Internet miniature painting/modelling sites that Johnson's Klear had been re-formulated and is now packed in a white plastic container.

I use Klear for applying transfers and as a base for my washes and glazes and so I set out to pick up a bottle of the 'old style' Klear (see below). I usually buy my Klear from Tescos - about one bottle ever two years, it goes a very long way! It was obvious very early in the search that the old formula/packaged Klear was no longer available. I tried Morrisons, Co-op and Somerfield and was beginning to think that I was too late. Then I saw two bottles for sale in Waitrose and picked up both for £2.58 a bottle. I am now OK for at least four years, but would recommend the product to any modeller/painter as a great base for ink washes, an extender for acrylic paints and the perfect base for transfers. Please note; Klear is the UK brand name for Future.

Tony

PS. It has been suggested to me that Klear/Future is the base of the new Games Workshop Washes.

Christmas 2008 Project - The Amber Shine Board part ten

The progress on the board has been very good, considering the bitterly cold weather we are experiencing in this part of Worcestershire, UK -10' at night with a high of -1' during the day. In fact it is so cold that my block of DAS modelling clay, bottles of water and vinegar-bath (I use for cleaning metal miniatures) have frozen solid!




These four work-in-progress shots show the main shrine now permanently attached to the 2 foot x 2 foot gaming tile, the wire for the lit monolith is now fed through a small hole in the base to a cut-out for the battery compartment.

The main stone area is raised on a sheet of spare foamboard (you can see it under the steps) and fixed to the main board with lots of steel pins and PVA glue. The groundwork is pre-mixed filler and PVA glue which when dry will be covered in sand and small stones. For now I have brought it into the kitchen in the hope that it will dry through and not warp.

Tony

Tuesday, 6 January 2009

Christmas 2008 Project - The Amber Shrine Board part nine

Just one evening and one afternoon later, the monolith is attached to the main stone plinth with PVA glue and the join covered and filled with DAS. I have also given the main stone areas a coat of filler and watered-down PVA glue to add some texture. The wire for the Christmas decoration lights has been fed through the shrine base and will eventually be further fed through the 2 foot x 2 foot tile. (I already have a small hole cut into the base of the tile to house the battery compartment - you can see the wire in the bottom of each photo).

In addition the edges of the 2 foot x 2 foot tile have been smoothed-out with filler and should be given a coat of sealer this week. The painting should start very soon.

The next stage will be to attach the shrine to the tile. The groundwork will then be built up with cardboard formers and filler.

I intend to place the shine in the centre of the tile - but at a very slight angle or twist. The groundwork style and colour have yet to be decided upon - should this be a desert scheme or full of vegetation? In addition I have yet to decide on the colour of the stone - dark or light, grey or brown?

Happy New Year - Tony