A Witchland Hovel
This tutorial was first published on Barking Irons Online in 2012. However since BIO closed this (as well as other tutorials) had been lost to the internet. I have reproduced it here as originally presented.
My latest Modelling Masterclass features a simple Witchlands
Hovel, the sort of wooden structure that could be found all over the undead frozen Steppes. The model owes much to various
postings on The Lead Adventure Forum and some images I found on e-bay. It is
therefore not an original design. However with a growing Witchlands Undead Army
I felt that it was about time I build another undead themed terrain pieces.
Construction
As with most of my modelling projects it started with a simple
sketch scaled for the slightly larger Flintloque miniatures. The sketch also
shows a larger Russian style, log or wooden church which could easily be built using the same
techniques and materials.
I wanted the sub-assembly to be robust and after transferring
the dimensions on to corrugated cardboard I glued the base or core model
together with my hot-glue gun. It isn’t
clear in some of these images, but the basic structure is in fact two layers of
corrugated cardboard covered with some cheap mounting card. This gives a very
strong building block on which to add the surface detail.
TIP; One tip I want to pass on is something I came upon by
accident. When using a hot-glue gun it is common to have the now cooled glue
squeeze out and settle in lumps on the surface of the model. In the past I have cut this excess glue away
with a knife. On this occasion I ran the still hot nozzle of the glue gun over
the excess glue and smoothed out the surface, thereby giving a very strong and
smooth surface on which to start building up the detail.
Once the basic house shape was finished I moved on to
cladding the walls. I have used coloured
lollipop sticks (or craft sticks) which I bought from Hobbycraft some time ago.
TIP: For some unknown reason coloured lollipop sticks or
craft sticks are cheaper than plain lollipop sticks. As the model will eventually be painted – I
suggest you choose the cheapest you can find.
I started with the buildings ends, laying distressed strips
over superglue and trimming the ends with a large ‘snap-off’ bladed knife when
the glue has fully set.
There is no reason why you cannot use the lollipop sticks
straight from the packet, however I prefer to distress the wooden sticks with
either coarse sandpaper or distressing the planks with the point of a
scalpel. In addition I further distress
the edges of the wooden planks by trimming and nipping the edges with a knife.
Both these actions although tedious will pay dividends when it comes to
painting and particularly drybrushing the model.
Once the ends were done I built up first the back and then
the front of the hovel in the same way.
You will see from the images that I have drawn the door and window
details onto the building and laid simple plastic card squares for the windows.
When the glue has fully set, I trim all the edges and sand
the joints smooth.
The next step is to add the supports or detailing strips to
the plain sides. This is done in exactly the same way as the earlier wall cladding
however I have used a little bit of Milliput epoxy putty to fill gaps and
smooth out the joints between adjoining wooden posts.
When dry I sanded the edges and joints smooth in an
attempt to hide the joins.
The door detail is again strips of lollipop sticks and the
window detail is built up from both thin card and lollipop sticks.
The roof cladding is applied in the same way as the walls,
although I have varied the lengths of the strips to give some variety and
visual interest.
TIP: You will see that I have not been particularly careful
at joining the roof ridge joints – these will be covered with a separate piece
of lollipop stick later in the construction and any carefully mitred joins
would not be seen!
The decorative roof end detail is copied from a model
featured on The Lead Adventure Forum and is applied in six separate strips each
end. The larger strips are in fact scrap
wood cut from a Clementines or Nectarines box, they were cut with a ‘snap-off’
bladed knife and a steel ruler, sanded smooth and then trimmed to size before
being distressed and superglued in place.
TIP: I am always on the look-out for scrap wood. O
ranges, tangerines and
sometimes vegetable are still supplied in small wooden crates. This scrap wood is ideal for scratch-building
terrain pieces, being light, easily cut and above all free just ask your local
Greengrocer or Market Trader.
The final piece of main construction was to add two strips
across either side of the roof. It will not surprise you to read that these too
have been modelled from lollipop sticks, cut into thin strips, distresses and then
superglued into position. The small
(white) additions to either end are meant to represent the strips protruding
through the decorative end panels. I modelled mine with plastic card and
superglued them into place.
I have commented on earlier Masterclasses that my favourite
part of any terrain construction project is the final detailing, this model was
no exception.
I cut four thin strips of plastic card into tiny plastic
card squares and using superglue applied with a wooden cocktail stick proceeded
to add rivets and wooden joining pegs all over the model. In total I have added about seventy such
slivers each of which will be picked out during the drybrushing phase.
Painting
With the modelling completed I spray painted the whole
building with a cheap black spray can and when dry touched-up any bits I had
missed with black and dark brown acrylic paint.
I was trying for a subdued and old weathered wood finish and
therefore applied subtle dark brown and grey drybrushes across the whole
model. The technique I used was one I
had observed in real life; Wooden buildings tend to have dark almost black
walls near the base of the building or at ground level, more colour further up
the walls and then silver/grey or bleached wood on the roof. I think I could
have done with one more grey (light grey) drybrush over the roof – but decided
not to as I quite liked the under-done effect.
All that scribing and distressing of the coloured lollipop
sticks during construction has really paid-off as the different layers of
drybrushing make them ’pop out’.
Apart from the drybrushed wooden walls there is little in
the way of any detail painting. I have
picked out a couple of features with brighter colours, but overall the dull
weather-beaten effect was the look I was after.
The base was first modelled from a 3mm thick ‘For Sale’ sign
cut into a rough oval with the groundwork built up with DAS modelling clay,
this is painted in my usual colour scheme – Games Workshop Snakebite Leather,
highlighted with Snakebite and Skull White with occasional stones picked out in
highlighted grey. To tie everything in, I have washed the base of the building
and the groundwork around the base of the building with a ‘muddy brown’ wash,
I have flocked the edges of the base with green railway
flock – to match-in with my gaming table. I have also added some static grass
clumps and a couple of bits of green foam foliage that I have been wanting to
try out for some time.
Once again I am left wondering if the model could have been
slightly smaller. The Witchlands Hovel is 120mm wide x 100mm deep x 100mm tall
(to top of chimney). If I was building it again, I would cut all dimensions by
at least 10mm, maybe even 15mm. However I am pleased with my first Witchlands
Hovel and plan on building a couple more – maybe even that church.
I have included this earlier Blog
link which gives additional information.
Tony