Tuesday, 14 July 2020

One Mini at a Time - part twelve



The latest Flintloque miniature is this Dwarf from the Dwarf Camp Followers set (52017). I have modified his Bowler hat into a top hat and mounted him on to a 2p coin before building up the groundwork with Milliput epoxy putty.

The figure was spray painted with Tamiya grey primer and then undercoated with a black/brown mix and 'washed' with a sepia wash.


I'll have more images posted soon, showing how he was painted and varnished but for now stay safe and

Keep Calm and Carry On Modelling

Tony

Sunday, 12 July 2020

Practical and Simple Wargame Terrain - part six



The latest issue of Miniature Wargames (issue 448 - August 2020) features another article written by me. This time a Timber Framed House modelled in the style of the long out-of-production and modular Pardulon resin buildings. The three page article shows how I built this 28mm scale house using the same principals as the earlier articles, namely;

1 - The model should be constructed from simply sourced or everyday materials.

2 - The model should be generic and able to be used in a wide variety of different games or genres.

3 - The model should be robust enough for wargame club use.

4 - The model should be finished to a good standard and resemble the building it represents.

5 - Finally, it should fit into a 6 inch x 6 inch x 6 inch box - for easy storage.

For details and images of this latest issue see the this link.


I have included images of the earlier models in this series (see below).






At this moment, there are still three similar articles/tutorials awaiting publication and my hope is to complete at least one more following the same principals of using scrap materials that are easily and readily available - in fact this particular model was built and painted during the Covid 19 lockdown using nothing more than corrugated cardboard, egg box card, lollipop sticks, balsawood and toilet roll card.

During the recent lockdown, I have been wondering if  this series could be published as a book - Book 4 or Dampfpanzerwagon Guide No. 4 in my series of self-published guides (see links to the right).

Dampfpanzerwagon Guide No. 4 - Simple Structures for Wargamers?

I was wondering if these greatly expanded tutorials or guides (the originals published in MW are just three pages long) would be of interest to readers of this Blog. Self publishing is not a cheap option and would require guaranteed sales of at least 250 copies to make initial production worthwhile and profitable. I have written in the past that I was not looking to write a fourth guide, but I feel this series of simple and practical structures could be a worthwhile project for both the novice and experienced terrain builder.

What do you think?

Stay safe and

Keep Calm and Carry On Modelling

Tony

One Mini at a Time - part eleven



The flesh areas were built up over a Snakebite Leather colour with highlights mixed from flesh and white and allowing the darker base colour to show through in the shadows.


The naval blue uniform was layered up from a base of dark blue, highlighted with lighter blue - not too many layers as I always find blue (particularly dark blue) doesn't need too many layers.


Detailing was done with a Rosemary & Co No. 401 Sable/Synthetic brush and a Winsor & Newton series 7 Sable brush.


The trousers were built up over a cream/linen colour and highlighted with white.


My usual Snakebite Leather coloured base with highlights and washes with some stones picked out in grey highlighted white.



The varnished and decorated miniature also shown with the rest of the boarding party (below).


I'm really enjoying painting up these Flintloque miniatures one-at-a-time. It is a lot more relaxing and rewarding than having a group of part-painted figures on my workbench, For now, stay safe and

Keep Calm and Carry On Modelling

Tony

Saturday, 11 July 2020

One Mini at a Time - part ten



The next Alternative Armies Flintloque miniature to be painted up is this Albion artillery officer. In this first image you can see the Milliput modifications and groundwork.

However there was also quite a bit of subtle mods this time done with Vallejo Putty mixed with a touch of PVA glue (the white areas on this grey undercoated miniature see image below).


Then before painting, proper, I undercoated the whole mini with a dark brown/black basecoat which was later 'washed' with a sepia wash. As I have noted in earlier posts, I prefer to base my miniatures before painting. I find it easier.

You should also be able to see my favourite miniature holder, a large cork stopper with Bluetac - three small pieces of Bluetac in a triangular shape rather than just one large blob. I find that the three smaller blabs hold the miniature better. I'll give more details of my modified cork mini holders in a later Blog post.


The next post should include details of how this metal figure was painted bt for now, stay safe and

Keep Calm and Carry On Modelling

Tony

Friday, 10 July 2020

One Mini at a Time - part nine



The groundwork was painted in my preferred Snakebite Leather colour and highlighted by drybrushing on a lighter colour before varnishing with both gloss varnish (for protection) and matt varnish.

The base was then decorated with some static grass and dark green ground foam and the miniature was finished.


The final image shows the finished Halfling alongside the earlier modified Obidiah figure to give an idea of the size.


I should have another in-progress post of yet another Flintloque character soon, but for now, stay safe and

Keep Calm and Carry On Modelling

Tony

Thursday, 9 July 2020

One Mini at a Time - part eight



The flesh areas have been built up over a Snakebite Leather coloured base, highlighted with both flesh and white added to the mix and then washed with the old GW flesh wash (the blue  topped wash).


The blue and black areas have been built up in a modified Kevin Dallimore style, lighter tones built up on the highlighted areas, while the red neckerchief  was a base of Gore Red, highlighted with Bright Red (an acrylic tube paint).


The linen trousers have been painted in an off-white colour and the belt touched-in with dark grey. Once again I have gone for a naval style colour scheme and even though this is a Frontear miniature, I have painted it as a Flintloque sailor or boarding party member.

Stay safe and

Keep Calm and Carry On Modelling

Tony

Wednesday, 8 July 2020

One Mini at a Time - part seven



The third figure is an Almorque Character from the Alternative Armies Frontear Range of metal miniatures (7101). After mounting the figure onto a 2p coin (I could have used a 1p but thought it would have looked a little too small), I built up the groundwork with Milliput epoxy putty.


I then primed the mini with Tamiya spray paint primer (grey) and used Vallejo Putty applied with an old paint brush to refine some of the detail. I find that mixing the putty with PVA glue and applying it is thin layers (it can take more than one layer to hide poor seams) works best.


The mini was undercoated in a dark brown colour and 'washed' with a sepia wash to highlight the miniature ready for painting.

As you can see, my usual basing and miniature prep work has many steps before I start painting. I wonder if anyone else does the same. Basing after painting - just doesn't work for me.

Stay safe and

Keep Calm and Carry On Modelling

Tony