Monday, 22 March 2021

14th Century Cog - W, S & S additional content

Following on from my earlier post showing details of the Wargames, Soldiers & Strategy article on how to build a 14th Century Cog I have included this additional content showing how the sails were made.

I used a linen handkerchief as the base and after dying it with acrylic paints, I drew on the sail design with pencil.

The sail shape was cut out with this disc cutter. Note the small seam on the sides and top.

Using the original design as a stencil I drew on the cross.

The sail seam have been exaggerated with a watercolour pencil. In addition the seams along the edges have glued back on themselves with PVA glue. I also added a strengthening strip across the sail which was cut from the handkerchief and also glued in place with PVA glue.

The red cross was painted with acrylic paints and highlighted to show both wear and the red strips crossing each other - this is how I believe sail decoration would have been added.

The sail was further details with mending thread (a thicker cotton thread) along the edges and to produce the sail tie-backs - once again glued in place with PVA glue. (You can see this detail if you 'click' on the images).

The finished sail was stitched onto the mast with cotton ready to be installed on the cog.

The finished 28mm scale Cog with the sail in place.


When producing magazine articles for publication, I am well aware that I have to cut-down the content quite a bit. By including these additional content posts, I would hope that I could add interest to the shortened article and pass on hints and tips that would otherwise have taken up too much magazine space.

Tony

Saturday, 20 March 2021

14th Century Cog - Wargames Soldiers & Strategy issue 113

The March/April issue of Wargames Soldiers & Strategy (issue 113) has an article written by me showing how I scratch-built this 14th Century Crusader Cog.

The model was built from blue foam, egg box card and balsawood then painted with various acrylic paints.

The sail was made from a linen handkerchief dyed with watered-down acrylic paints then hand stitched in place.

For full details see the latest edition of W, S & S or go here.

 

Tony

Thursday, 18 March 2021

BLOOD BOWL and TYRANID ATTACK from Games Workshop

I was recently given a carrier bag full of modelling materials and these two games. The modelling materials have already been moved to the shed and will no doubt be used very soon but I'm not sure what to do with BLOOD BOWL and TYRANID ATTACK.

As you can see both games are either complete or nearly complete - I have not had chance to check ALL of the contents.


Tyranid Attack looks to be all there with some of the pieces constructed and painted (at least with an undercoat).



Both boxed games were a gift from a friend of my daughters who was clearing out some of his older content. I would normally offer the games to my son who has quite a collect of board games, but he has said no as he already has a number of GW games that he does not play.

I think I might try to paint up a couple of models and see how I get on.

Thank you Mal.

Tony

Tuesday, 16 March 2021

Flintloque Dwarf Landwehr - painting the bases

I know it's a little out of sequence but I have now painted the bases of all eight miniatures. I have used my usual formula of a Snakebite Leather base and highlighted by adding either Flesh or white to the mix with individual stones picked-out in a grey then highlighted with white.


I think the painted bases have helped to define the minis as the overall grey colour was a little dour.

Stay safe.

Tony

Monday, 15 March 2021

A Scratch Built Epic Scale Church for ACW gaming

The most recent edition of Miniature Wargames (issue 456 - April 2021) has another 'how-to' article showing how I built and painted an Epic Scale American Civil War Church which was inspired by the new Epic Scale ACW plastic figures produced by Warlord Games.

The finished model is mounted on to a used CD with groundwork built up from ready-mixed filler and DAS modelling clay. The painted figure in the image below is from the Warlord games plastic sprue but mounted on a round plastic counter rather than the square base supplied.

The model was great fun to produce and a change from my more usual 28mm/32mm scale terrain pieces.

For more details of the magazine contents, see this link.


The break from producing Simple and Practical wargame terrain articles has meant that I have had to think about the materials used, but don't worry normal service will be resumed in next months magazine.

Tony

Saturday, 13 March 2021

Flintloque Dwarf Landwehr - more painting

Part Ten

I've started the detail painting. the most imposing is the white cross on the head gear which follows the design in this illustration.


There is still a bit to do, but they are progressing well and the next step will be the bases.


Tony

Wednesday, 10 March 2021

Flintloque Dwarf Landwehr - starting to paint

Part Nine

In a change from my usual painting process, I started with the grey uniform colour, which was mixed from both grey and brown. The colour was slightly darker than the colour shown on this illustration as I thought I could always add additional highlights later.

Once the grey/brown was dry, I painted the flesh areas in my Snakebite Leather base colour and highlighted by adding Flesh and white to the mix before washing with a Flesh wash. With over 50% of the minis being grey - I am sure that this was the right order to paint these dour Dwarf Landwehr.



Tony