Sunday, 20 September 2015

Raising Steam by Terry Pratchett



I have just finished reading Raising Steam, the 40th Terry Pratchett Discworld novel and can confirm that the master has produced another winner.

I wrote earlier in the year of the passing of Terry and it seams rather strange to be reviewing a book when the author is no longer with us, but this is a great read, not quite as laugh out loud as some of his books, but a funny book never the less. The commentary on how technology is received (or not) is a brilliant satire on contemporary life and a worth while best seller.

I am aware of one more Terry Pratchett book - The Shepherd's Crown which has jumped straight in at No.1. I am expecting a copy as a Christmas present and will write a review when I have finished it.

The king is dead - long live the king.

Tony

Saturday, 19 September 2015

Garden Gnome - part eight



Cecil the Gnome - nearing completion.

I have really enjoyed painting him and although not true modelling or gaming, I hope other have too.


Tony

Wednesday, 16 September 2015

Garden Gnome - part seven



I think it is obvious how the painting has progressed since the last post. I have spent some time 'blending-in' the flesh highlights and toning-down those 'rosy cheeks'.

The beard was first painted mid grey before being highlighted with Titanium White and the pointy hat has been painted red/orange.


I choose to paint the cardigan in a mid blue colour and highlight the ribs with a lighter blue.

An internet search found that this particular Gnome is still available and can be bought from K's Statuary in the United States, see this link for more details.


Hopefully not too much to go now.

Tony

Monday, 14 September 2015

Witchlands Tomb



The Witchlands Tomb

This particular model was inspired by a collection of graveyard buildings modelled by Hombre over on The Lead Adventure Forum.  In addition I had wanted to model some Witchlands themed terrain for some time.

It first appeared on the now closed Barking Irons site in September 2011.

I already have a large collection of grave stones which were made some time ago, but thought that my graveyard could do with having an imposing centre piece.


I set about sketching some ideas and settled on a box shaped tomb with a domed roof on top of some stone steps.


The basic construction is a block of Blue Foam, actually a couple of blocks glued together with a hot glue gun and then sanded square.  The main structure is simple however I added a front panel that has a doorway aperture which was also glued with the hot glue gun.

Note;  When working with Blue Foam, I have found that a hot glue gun speeds up construction time.  However there is no reason why you cannot use uPVA and reinforce the joints with either steel pins or cocktail sticks.

The doorway is made from textured lollipop sticks, cut into strips, distressed with a scalpel and some coarse sandpaper then glued to a piece of thin card backing.  Once the glue has set, the door can be shaped, sanded and glued into the opening.


The next step was to add some architectural features.  I choose a simple archway over the door, which was first cut with a scalpel and later ‘opened out’ with a sharp pencil.  In addition I added some stone blocks to the bottom left of the doorway to show some disrepair using the same technique.

I have used some 5mm thick plastic card (actually a For Sale sign that I have had for some time) to build the roof and step.

Note;  Old or disused plastic For Sale signs offer cheap modelling material, ideal for scratch-building. Always be on the look-out for suitable plastic card which is usually thrown away.


I then added two more plastic card steps to the base and one more to the top of the roof.  The domed shaped plastic ball is actually the plastic ball from a roll-on deodorant bottle cut in half and sanded flat before being superglued to the top of roof.

Note; Never throw anything away!


The main walls of the tomb were a little bare and needed texturing and filling-in in places.  I used a mix of ready mixed filler, uPVA glue and some white acrylic paint to ‘plaster’ the building.


Next comes my favourite part – the detailing.  I added a large cross to the roof, which was carved from a piece of 5mm thick plastic card with the edges sanded smooth.  I mounted the cross with a metal pin in its base and superglue it in place as I can envisage this particular joint being a little fragile. 

The door is details with a small lock, some metal strapping and loads of sliced plastic rod.  There is also a small plastic card plaque above the door.


Note; Slice the plastic rod into thin slivers and apply superglue to the door strapping.  Pick up each individual sliver (or rivet) with the point of a No11 Scalpel and apply one-by-one.  It is sometimes necessary to ‘wash’ the area with some liquid cement to seal these small pieces in place.


I am often asked, “How long did it take you to model that?”

The Tomb was constructed in one evening, greatly speeded up by the use of the hot glue gun and not having to wait for the glue to dry.

Now on to the painting.  I wanted to use a new technique and basecoated the whole model with a mix of Raw Umber and a small amount of Chaos Black acrylic paint.  This gives a very dark brown base.


Once dry I mixed up a very dark grey.  I used Raw Umber, Chaos Black and some Titanium White.  The first highlight is a very slight colour change but by using Raw Umber instead of a more traditional Black/White base for the grey it has given the model a more ‘rich’ colour.


With the second highlight I used some Light Flesh and more White with the Raw Umber.  Once again the use of a non Black/White grey has given a better colour.


The thirds highlight has more white added to the mix and some extreme highlighting on the very edges of the roof and wall panels.  For the extreme highlights I used some watered-down pure white.

Note; When painting grey, it is sometimes the case that a plain Black and White mix can be a little too 'stark'.  By adding Raw Umber and Light Flesh, this has not been the case on this project.


Now for some real colour!  The door was first painted with a mix of Raw Umber and Snakebite Leather, highlighted with some Snakebite Leather and highlighted again with Snakebite and Skull White.

The door strapping and plaque was painted in Bestial Brown and Snakebite, highlighted with Snakebite and then pure Orange.


The final detailing was a wash of Devan Mud which I watered down and ran along the major joints and shadows.

I also added some Grass Tufts, which were cut in half and glued with uPVA glue with the straight edge against the join.


The final photo shows the Tomb finished and a Flintloque miniature alongside.  I am very pleased with the colour of the finished model.  I think that using the Raw Umber to give an alternative grey stonework colour has worked well.

It is obvious from the photos – that I have not added a base to this particular piece of terrain as is my usual custom.  I felt that with a ‘footprint’ of 120mm x 120mm the stone steps were more than enough and a larger grass textured base might have been over-powering as well as limiting its use.

The painting took about three/four hours or one evenings work.  With the simple construction – this model is a project easily within the skill base of any modeller.

As stated earlier, this particular piece of scratch built terrain was first included on the closed Barking Irons Online site. In reproducing it here I am hoping that I can raise some money for charity. If you have read and enjoyed this short tutorial, I would ask that the next time you pass a charity collection tin or someone in the street collecting that you donate whatever you think fit and remember this article.

Thank you.

Tony

Saturday, 12 September 2015

Droitwich Spa Salt Day 2015



Earlier today Sue and I had a stroll around Vines Park, Droitwich to check out the 2015 Salt Day. As last year the Roman Legionnaires were out in force. They are regular visitors to this Fayre.


I was able to chat to a number of the reenactors and even handle some of the reproduction weapons and equipment.


I thought that this pigs skin water/wine flask was worth recording. I can see this being modelled.


There was a very informative demonstration on how to make mail armour. It is amazing just how heavy this stuff is!


I then had a long conversation about the Roman Pilum. I had read that the metal shaft between the main spear point and the weighted join was made from 'soft' metal - so that it would bend when impaled on an enemies shield. I was told in no uncertain terms that this was NOT TRUE and that the shaft is actually hardened metal!

I was given the chance to handle the Pilum and can confirm that this model at least was weighted just below the weighted join to the bottom left of this picture.


These water containers were on display to the side of the marching fort kitchen.


And these wine jars were to the other side.


The final two images show the equipment that was on display.


And a legionnaire in chain mail. You can be excused for wondering about the Blue colour of the shield design. I asked about this last year and was told that there is very little evidence as to exactly what colour these shields were. I was told that there is just as much evidence for a blue shield as the more common red ones.


Great fun and very informative. For more information about The Roman Military Research Society (or RMRS) go to this link.

Tony

Friday, 11 September 2015

Garden Gnome - part six



At long last, some paint!

I have used a wide range of different acrylic paints, craft paints, artists tube acrylics and model making paints to build-up the flesh tones (and those very rosy cheeks) plus the little Robin Redbreast.


Now that he does have some colour, I think it is obvious why I bought him. "That face is just full of character."

Tony

Thursday, 10 September 2015

Garden Gnome - part five



I had planned to start the painting by now, but instead I have undercoated or primed the Garden Gnome with waterproof uPVA glue. I thought it would be wise to have all the preparation done before I start adding any paint. This is a step that will have little effect on the model for now, but which I hope will give the paint scheme a much longer life.


I have uploaded some images of my Mother-in-Laws Garden Gnomes which were repainted by Sue and I some years ago. The big difference between these and the concrete Gnome above is that these are made from a pottery or clay like material and are hollow.




This final Gnome was Sue's and is over thirty years old. The mushroom is a garden ornament to which I have added a door and a chimney.


While these three mushrooms and the rabbit are concrete garden ornaments which have been repainted by Sue or I.


Tony