Friday, 30 May 2008

Fighter Aircraft of the Great War

Following the earlier post showing the 'kit built' Sopwith Camel in 1/72nd scale I have up-loaded these images of scratch built 1/100th scale WW1 fighters that were intended as gaming pieces for a WW1 wargame that I never finished.

Plans were re-drawn from 1/72nd scale illustrations and detail taken from additional plans, photos and illustrations of aircraft.

Each model has a fuselage carved from wood, wings from plastic card and detail from a whole host of material, e.g. card, matchsticks, staples, Biro pen barrels and plastic rod. The last two images show two additional aircraft under construction.

Each model was painted with acrylics and the markings were hand painted. The models were then varnished and mounted on an 'early style' GW flying base.







I produced nearly a dozen separate models and even had a brief comment printed in MARS, an American gaming magazine.
They were great fun to produce and helped to improve my early drawing and modelling skills, however now that you can buy ready painted 1/144th scale WW1 airplanes the idea has lost most of its interest.
Tony

Sopwith Camel F1

This particular model is a 1/72nd scale Sopwith Camel F1 from ACADEMY. It was bought for me by my wife after I commented that as a young boy I had modelled a similar aicraft. The kit is built almost straight-from-the-box, with only a few additions. It is painted with acrylics and mounted on a 'charity shop' lid.



It was a great weekend modelling project that actually took closer to three weeks to complete due to poor fit and excess flash, but I am pleased with the result. I had planned on adding rigging, but in the end left it un-rigged for simplicity.

The coloufull scheme is a mixture of kit decals and hand painting, following the box artwork.

Tony

Tuesday, 27 May 2008

Narrow gauge model railway layout part three

When I got rid of the part built OSO Salt layout, I built myself a 'coffee table layout' called Ogam & Stone. A stonemasons yard with a simple 'kidney shaped' track plan and the main buildings in the centre. There are very few pictures of this particular layout, but here is one - looking towards the foremans office with Bob the workman, sneaking an early lunch.

Layout and figures are 'O Scale' or 7mm = 1foot.

Almost all of the items you see in this picture are scratch built using a variety of different materials (as OSO Salt) and inspiration from an actual stonemasons yard in the South West. I found myself parked at the side of the road, making quick pencil sketches on any piece of paper I could find, later the sketches were refined and off to work I went!

Tony

Narrow gauge model railway layout part two

Here are examples of the narrow gauge engines I have scratch built in plastic card. Each based on an actual diesel or 'high pressure steam' engine design.

They are built to the scale of 7mm = 1foot or O gauge and run on HO/OO track - 16.5mm.






In order they are a 6 wheel Kerr Stuart Diesel, a 4 wheel Kerr Stuart Diesel, an Avonside Diesel, a Sentinel High Pressure Steam Engine, a Kerr Stuart High Pressure Steam Engine and a Simplex WW1 Protected Tractor.

Tony

Monday, 26 May 2008

Narrow gauge model railway layout

Some years ago my son, Gareth and I built a narrow gauge model railway layout - that never got finished. Earlier today I came across these photos of the layout being built. The models are all 'scratch built' to the scale of 7mm = 1foot and to the narrow gauge of 2foot 3inches (16.5mm or HO/OO track). For anyone interested the correct notation is O-16.5 (with O = scale of the figures and 16.5mm = the track gauge).





The top four photos show the right hand side of the layout, that was very near to being finished. The whole layout was mounted on an old internal door and the track layout was an oval or 'bone' shape. The end that was fully finished was meant to be the supply yard, while the other end was to be a factory unit.

The fifth photo shows the main engine shed and water tower before being attached to the baseboard. The next two show items of 'clutter' that were painted but never added to the layout and the final photo show the right hand side of the layout in full - with motive power and wagons.

The engines are models of Kerr Stuart, four wheel narrow gauge, diesel engines and the wagons were based on designs and drawings from the Welsh Highlands Railway. The engines and wagons won a modelling competition at the 7mm Narrow Gauge Railway Association some years ago, but have since been very badly damaged, maybe beyond repair.

The buildings are a mix of designs, built from card, balsa, DAS modelling clay and plastic card. The track and points are from PECO.

Ground cover is a mix of ground foam, scouring pads and flock. I also experimented with painted lint from the lint filter in a tumble drier. I painted diluted PVA glue on to the base board then attached the lint, when dry I pulled the lint off and what was left was painted with green acrylic paint. I thought it looked OK but not fantastic.

The OSO Salt name and logo is copied from an actual salt company based in Droitwich Spa, Worcestershire which used the same pale blue and red livery on its fleet of road lorries. Sadly the company closed down some years ago - the offices are to be pulled down and a housing development is planned to be built on the site.

"The soil colour in this region is red when dry and dark brown when wet. I had tried to include this distinctive feature when modelling the ground colour, in fact some of the texture is dried Droitwich Spa soil sieved and glued to the base board!"

I would hope that some day - OSO Salt could be resurrected and the layout rebuilt, maybe a little project for my retirement!

Tony

Sunday, 25 May 2008

Shipyard - The CSS Aeronef Fleet

Now that details of CSS Ranger has been posted (see earlier post) I have included with this entry the remaining Confederate States Aeronefs. They are all based on the 28mm Cloudships of Mars models seen at Salute 06 and ACW 'Iron clads'.

The construction of each follows the same techniques used with CSA Ranger.

CSS Texas - an up-armourd Ranger, with a fully enclosed hull and a 'can-opener' ram. I think this is my favourite of the Confederate fleet! 140mm long.

CSS Dixie - larger and better armed than Texas, this particular Aeronef has a forward firing gun as well as a formidable broadsides. 150mm long.

CSS Hazard, modelled after a CSA 'iron clad' of the American Civil War. Hazard is the best armoured of the whole fleet having blue painted metal plating on the whole hull. 120mm long.

CSS Havana - a flying fort, eleven gun ports with a fully enclosed hull and steam engine. 120mm long.

The thinking behind this whole fleet is that The Confederate States are using ex-Martian hulls and expertise with salvaged steam engines and reinforced hulls to improvise a fleet to counter the might of the Northern States. I wanted a feel that reminded me of the sea battle between the USA Monitor and CSA Virginia.

The names were all inspired by old westerns and The Dukes of Hazard. Texas is a bit of an strange one as regular readers will know that in my Space 1889/Aeronef universe Texas is an independent state, however like the Alamo - Texas inspires great things in the minds of the Southern States!

Tony

Saturday, 24 May 2008

Shipyard - CSS Ranger

This is a modified Martian skiff, reto-fitted with a steam engine and screw. The model is highly influenced by the 28mm Cloudships of Mars models first seen at Salute 06, in particular the martian ship Ah'ny uthar which is based on a Star Wars toy and as such is in fact a model of a model of a model! See;

http://www.salute.co.uk/salutegames/cloudships/main.htm


Construction started with the main deck/hull which is balsa with a sheet of plastic card added to the top. The bow and stern housings are balsa blocks carved and then sanded to shape with either plastic card or paper detailing.

Starting at the bow, the ram is plastic card with added plastic card rivets, the hand rail is plastic scrap super glued to the out building and the stearing wheel is a section of plastic rod attached to a plastic card mounting. The gun outriggers are sections of knitting needles, first sliced and then cut in half before being super glued to the hull. The engine is a section of knitting needle with scrap plastic and rod added to hint at detail. The hand rails are sections of 1/180th scale plastic ladders. The flag pole is a section of cocktail stick, sanded to a taper and the rudders are pieces of plastic card.

Other detailing is taken from the scrap box or as previously described on earlier Space 1889/Aeronef models.

The finished model was painted with acrylic paints - first dark brown and then drybrushed with lighter shades. The engine is black, drybrushed with dark grey and the two rudders are linen with white highlights. The flag was first downloaded from the internet then cut and glued in place before being over painted with acrylic paints. Finally the model was varnished and the clear plastic disc was added to the propellor shaft.

The model is 110mm long - tip of the ram to rear of the propellor shaft.

The ship is named CSS Ranger and was the first of my 'made up' CSS Martian Fleet. In my own alternative universe The US States are still at war with The CSS states and Texas is independent.

Regards

Tony