Monday, 21 September 2015

Simple Statuary for Frostgrave



You would be hard-pressed not to have seen and read about the phenomenal rise of the latest Osprey publication/game Frostgrave. I have already written a Blog post detailing how I purchased a copy the first week it was launched.

Since then I have been planning how to build my own band of adventurers as well as passing the book around a group of select gaming friends. One such acquaintance and work colleague, Mike has even gone ahead and purchased his own copy.

Mike and I are planning a game very soon and we are both actively searching out suitable miniatures and building Frostgrave inspired terrain. Most of the terrain I have built for Flintloque could work, but even so I have started a couple of new terrain building projects. This simple statue is one such article and I hope that it is of use to others.

Image Two - Searching through my 'spares box' I came across this Monster-in-my-Pocket creature, a winged and eagle headed humanoid. I also pulled out this plastic cake-decorating pillar. A good starting point for some Frostgrave Statuary.....


Image Three - The miniatures was glued to the top of the plastic pillar with superglue and any gaps filled with DAS modelling clay.

The base is an off-cut of 3mm thick plastic card cut into a rough circle with the edges first cut and then sanded to a chamfer.

The simple groundwork is more DAS modelling clay added over a layer of uPVA glue.


Image Four - The groundwork has been further textured with sieved stones and fine sand applied over dilute uPVA glue.


Image Five - The Flintloque Rifleorc gives some idea of the size of this statue. The model is 140mm tall (base of pillar to top of wings) and the base is 70mm x 70mm.

I could have cut the plastic pillar down, but thought that for this 'simple, quick and dirty' tutorial it was much simpler to go ahead with the pillar without any modification.

In this image the model has been primed with uPVA glue to which I have added some very fine sawdust.


Image Six - The painting started with an all-over undercoat of dark brown, mixed with black and further refined with some lighter brown. The paint was applied with a large and soft brush, with the different colours being mixed and blended on the model


Image Seven - The stone colour has been built-up with black, white and blue acrylic paint. Little of the brown is evident!


Image Eight - I have now 'washed' the model with various washes, some bought and others home-made. This helps to define detail and 'blend' the various colours together. I believe that working over a brown base and using blue in the mix fits in better with the superb images in the Frostgrave book.


Image Nine - The base or groundwork has been painted in my usual style and colour mix - Snakebite Leather with Snakebite and Skull White highlighting. I have picked out various odd stones in grey (mixed from black and white, highlighted with more white).


Image Ten - Prior to varnishing with Galleria mat varnish, I gave the whole model one last 'drybrush' with a toned-down white acrylic paint, just a fine dusting to highlight the sculpted detail.


Image Eleven - The finished model to add to my (huge) collection of scratch-built terrain. The flocking is 'railway scatter' or dyed sawdust with odd clumps of ground foam and a couple of static grass tufts glued in place with superglue.


Image Twelve - A different angle.


Image Thirteen - Another image with the Flintloque Rifleorc, hopefully giving an idea of the size and scale of this simple piece of terrain.


The construction took a couple of hours, then after leaving it overnight, the painting was completed today. In total the model took about 3 hours (start-to-finish) to produce and because I was using existing materials, cost nothing - a Win, Win.

I have purposely not added any snow to the model, believing that I can always sprinkle some onto the gaming table later. By not making it permanent, I can also use this model with my Flintloque miniatures and terrain.

Look out for more simple Frostgrave terrain over the next couple of months.

Tony

By publishing this tutorial I am hoping that I can raise some money for charity. If you have read and enjoyed this short tutorial, I would ask that the next time you pass a charity collection tin or someone in the street collecting that you donate whatever you think fit and remember this article.

Garden Gnome - part nine



Tartan trews on a garden gnome! Whatever next?

To be honest, I'm not sure it works and I might over-paint them. But they were fun to paint.


The design was copied from my work jacket - a Golf jacket that once belonged to my Father and the coat I still use when ever I am down the shed following my hobby. I feel that Dad is with me when ever I wear it.


We will see if I re-paint them.....

Tony

Sunday, 20 September 2015

Raising Steam by Terry Pratchett



I have just finished reading Raising Steam, the 40th Terry Pratchett Discworld novel and can confirm that the master has produced another winner.

I wrote earlier in the year of the passing of Terry and it seams rather strange to be reviewing a book when the author is no longer with us, but this is a great read, not quite as laugh out loud as some of his books, but a funny book never the less. The commentary on how technology is received (or not) is a brilliant satire on contemporary life and a worth while best seller.

I am aware of one more Terry Pratchett book - The Shepherd's Crown which has jumped straight in at No.1. I am expecting a copy as a Christmas present and will write a review when I have finished it.

The king is dead - long live the king.

Tony

Saturday, 19 September 2015

Garden Gnome - part eight



Cecil the Gnome - nearing completion.

I have really enjoyed painting him and although not true modelling or gaming, I hope other have too.


Tony

Wednesday, 16 September 2015

Garden Gnome - part seven



I think it is obvious how the painting has progressed since the last post. I have spent some time 'blending-in' the flesh highlights and toning-down those 'rosy cheeks'.

The beard was first painted mid grey before being highlighted with Titanium White and the pointy hat has been painted red/orange.


I choose to paint the cardigan in a mid blue colour and highlight the ribs with a lighter blue.

An internet search found that this particular Gnome is still available and can be bought from K's Statuary in the United States, see this link for more details.


Hopefully not too much to go now.

Tony

Monday, 14 September 2015

Witchlands Tomb



The Witchlands Tomb

This particular model was inspired by a collection of graveyard buildings modelled by Hombre over on The Lead Adventure Forum.  In addition I had wanted to model some Witchlands themed terrain for some time.

It first appeared on the now closed Barking Irons site in September 2011.

I already have a large collection of grave stones which were made some time ago, but thought that my graveyard could do with having an imposing centre piece.


I set about sketching some ideas and settled on a box shaped tomb with a domed roof on top of some stone steps.


The basic construction is a block of Blue Foam, actually a couple of blocks glued together with a hot glue gun and then sanded square.  The main structure is simple however I added a front panel that has a doorway aperture which was also glued with the hot glue gun.

Note;  When working with Blue Foam, I have found that a hot glue gun speeds up construction time.  However there is no reason why you cannot use uPVA and reinforce the joints with either steel pins or cocktail sticks.

The doorway is made from textured lollipop sticks, cut into strips, distressed with a scalpel and some coarse sandpaper then glued to a piece of thin card backing.  Once the glue has set, the door can be shaped, sanded and glued into the opening.


The next step was to add some architectural features.  I choose a simple archway over the door, which was first cut with a scalpel and later ‘opened out’ with a sharp pencil.  In addition I added some stone blocks to the bottom left of the doorway to show some disrepair using the same technique.

I have used some 5mm thick plastic card (actually a For Sale sign that I have had for some time) to build the roof and step.

Note;  Old or disused plastic For Sale signs offer cheap modelling material, ideal for scratch-building. Always be on the look-out for suitable plastic card which is usually thrown away.


I then added two more plastic card steps to the base and one more to the top of the roof.  The domed shaped plastic ball is actually the plastic ball from a roll-on deodorant bottle cut in half and sanded flat before being superglued to the top of roof.

Note; Never throw anything away!


The main walls of the tomb were a little bare and needed texturing and filling-in in places.  I used a mix of ready mixed filler, uPVA glue and some white acrylic paint to ‘plaster’ the building.


Next comes my favourite part – the detailing.  I added a large cross to the roof, which was carved from a piece of 5mm thick plastic card with the edges sanded smooth.  I mounted the cross with a metal pin in its base and superglue it in place as I can envisage this particular joint being a little fragile. 

The door is details with a small lock, some metal strapping and loads of sliced plastic rod.  There is also a small plastic card plaque above the door.


Note; Slice the plastic rod into thin slivers and apply superglue to the door strapping.  Pick up each individual sliver (or rivet) with the point of a No11 Scalpel and apply one-by-one.  It is sometimes necessary to ‘wash’ the area with some liquid cement to seal these small pieces in place.


I am often asked, “How long did it take you to model that?”

The Tomb was constructed in one evening, greatly speeded up by the use of the hot glue gun and not having to wait for the glue to dry.

Now on to the painting.  I wanted to use a new technique and basecoated the whole model with a mix of Raw Umber and a small amount of Chaos Black acrylic paint.  This gives a very dark brown base.


Once dry I mixed up a very dark grey.  I used Raw Umber, Chaos Black and some Titanium White.  The first highlight is a very slight colour change but by using Raw Umber instead of a more traditional Black/White base for the grey it has given the model a more ‘rich’ colour.


With the second highlight I used some Light Flesh and more White with the Raw Umber.  Once again the use of a non Black/White grey has given a better colour.


The thirds highlight has more white added to the mix and some extreme highlighting on the very edges of the roof and wall panels.  For the extreme highlights I used some watered-down pure white.

Note; When painting grey, it is sometimes the case that a plain Black and White mix can be a little too 'stark'.  By adding Raw Umber and Light Flesh, this has not been the case on this project.


Now for some real colour!  The door was first painted with a mix of Raw Umber and Snakebite Leather, highlighted with some Snakebite Leather and highlighted again with Snakebite and Skull White.

The door strapping and plaque was painted in Bestial Brown and Snakebite, highlighted with Snakebite and then pure Orange.


The final detailing was a wash of Devan Mud which I watered down and ran along the major joints and shadows.

I also added some Grass Tufts, which were cut in half and glued with uPVA glue with the straight edge against the join.


The final photo shows the Tomb finished and a Flintloque miniature alongside.  I am very pleased with the colour of the finished model.  I think that using the Raw Umber to give an alternative grey stonework colour has worked well.

It is obvious from the photos – that I have not added a base to this particular piece of terrain as is my usual custom.  I felt that with a ‘footprint’ of 120mm x 120mm the stone steps were more than enough and a larger grass textured base might have been over-powering as well as limiting its use.

The painting took about three/four hours or one evenings work.  With the simple construction – this model is a project easily within the skill base of any modeller.

As stated earlier, this particular piece of scratch built terrain was first included on the closed Barking Irons Online site. In reproducing it here I am hoping that I can raise some money for charity. If you have read and enjoyed this short tutorial, I would ask that the next time you pass a charity collection tin or someone in the street collecting that you donate whatever you think fit and remember this article.

Thank you.

Tony

Saturday, 12 September 2015

Droitwich Spa Salt Day 2015



Earlier today Sue and I had a stroll around Vines Park, Droitwich to check out the 2015 Salt Day. As last year the Roman Legionnaires were out in force. They are regular visitors to this Fayre.


I was able to chat to a number of the reenactors and even handle some of the reproduction weapons and equipment.


I thought that this pigs skin water/wine flask was worth recording. I can see this being modelled.


There was a very informative demonstration on how to make mail armour. It is amazing just how heavy this stuff is!


I then had a long conversation about the Roman Pilum. I had read that the metal shaft between the main spear point and the weighted join was made from 'soft' metal - so that it would bend when impaled on an enemies shield. I was told in no uncertain terms that this was NOT TRUE and that the shaft is actually hardened metal!

I was given the chance to handle the Pilum and can confirm that this model at least was weighted just below the weighted join to the bottom left of this picture.


These water containers were on display to the side of the marching fort kitchen.


And these wine jars were to the other side.


The final two images show the equipment that was on display.


And a legionnaire in chain mail. You can be excused for wondering about the Blue colour of the shield design. I asked about this last year and was told that there is very little evidence as to exactly what colour these shields were. I was told that there is just as much evidence for a blue shield as the more common red ones.


Great fun and very informative. For more information about The Roman Military Research Society (or RMRS) go to this link.

Tony