Sunday, 30 January 2022

Flintloque/Silver Bayonet cross over - part twenty seven

There have been a number of posts on different Silver Bayonet themed sites asking "what do you use for Goblins?" I've used these old Games Workshop Snottlings mounted on 1p coins and painted as either traditional Green Goblins, Red Goblins or Redcaps.

The images below show the work-in-progress. To give the miniatures some height and in most cases extra weight, I have mounted the minis on to sections of metal walls from Alternative Armies, resin terrain or small sections of stones (from the garden).

The bases were further textured with sieved stones and sand applied over PVA glue before being undercoated with a grey spray can.

The final image shows the four Goblins and a hooded Demon alongside a Flintloque RifleOrc. A traditional Snottling stands just 14mm tall (head to toe).


I have some additional Snottling Goblins somewhere in my painted collection and will try to photograph them alongside these figures as soon as I can get in to the attic and search for them.

Tony

Wednesday, 26 January 2022

Flintloque/Silver Bayonet cross over - part twenty six

Today's post features a couple of Pixies for The Silver Bayonet. The miniatures (and yes they are very small) are from the Wargames Foundry/Warmonger range of metal miniatures and are mounted on cut down metal wall sections from Alternative Armies which are then further mounted on to 1p coins with Milliput sculpting and fine sand texturing.

The miniatures were spray painted with a grey undercoat before being painted with a variety of different acrylic paints.

The final image shows these pesky Pixies alongside a Flintloque RifleOrc after they had been varnished with Galleria matt varnish and the bases decorated with static grass and tufts.


The tiny Cherubs stand just 20mm (head to toe).

Tony

Monday, 24 January 2022

Markers for my Flintloque/Silver Bayonet cross over - part three

These objective markers were a case of searching through my 'spares box' for anything that I could re-use as markers for my Flintloque/Silver Bayonet cross over project. It was a matter of using anything I could find, from reproduction coins to a slab of Plaster of Paris. It was great fun to both model and paint the objective markers and cost nothing!

The markers were based on 35mm wooden counters with the groundwork built up from either Milliput or DAS modelling clay.

These images show the work-in-progress and as you can see the bits really were a haphazard mix of bits of scrap. As a modelling project. I would recommend it to all.





Tony

Saturday, 22 January 2022

Flintloque/Silver Bayonet cross over -part twenty five

Demon for The Silver Bayonet

The model is based on a Metal Giant from the Grim Reaper Nasteez range and had been previously converted, based and basecoated as a Frost Giant for my 40mm Flash Gordon collection. With the launch of The Silver Bayonet, I was looking around for suitable proxy miniatures and thought about using the mini as a Troll, but once I added some bat wings to the shoulders, the figure took on a whole new persona.

The wings were also from my 'spares box' (a bat or lizard mini) and were glued in place after some Dremel surgery. The join was hidden under Green Stuff and the mini was 'cleaned up' ready for undercoating grey. The Demon is mounted on to a 48mm washer with the groundwork built up from Milliput and further textured with sieved stones and sand.

The red colour scheme was copied from a similar Demon miniature seen on the Internet. The colour was built up from a dark chocolate brown and highlighted with bright red from the Golden Acrylics range. The model was then 'washed' with some home-made washes made using watercolur acrylic inks and acrylic medium (both products were Christmas presents) - see this post for more information.


I have varnished the finished figure with both matt and gloss varnishes and decorated the base with static grass and tufts. The Demon miniature is 55mm tall (head to toe) and slightly taller if you measure to the top of the wings. Here you can see him alongside a Flintloque RifleOrc for comparison.

Tony

Thursday, 20 January 2022

Flintloque/Silver Bayonet cross over - part twenty four


Living Armour for The Silver Bayonet

Regular readers of the blog will be well aware that the new game from Osprey Games - The Silver Bayonet written by Joseph McCullough has been a major inspiration to me, allowing me to re-visit my collection of painted and un-painted Flintloque miniatures and search through my 'bits box' for suitable 'stand-in' minis to use in the game.

This plastic toy figure was bought in Bangkok over ten years ago and had been relegated to the bottom of my 'bits-box' destined to never see the light of day again. That is until I started searching for a suitable miniature to use as Living Armour.

The plastic kit is similar to the small clip-together models which can sometimes be found in Kinder Eggs. In this case a five piece kit moulded in silver.

I mounted the model onto a pre-decimalisation penny and built up the base with Milliput before painting, washing and varnishing the figure. The final image shows the Living Armour alongside a Flintloque RifleOrc. The Living Armour model is 50mm tall (head to toe).


Prior to choosing this base model to represent my Living Armour, I had looked at a number of metal and plastic figures, but nothing inspired me. This Anime style figure had been bought with the intention of painting it as a stone statue (many years ago) but I think it works perfectly as a 'stand-in' Living Armour proxy.

Finally, I should add that I chose today's post from a selection of about five finished Silver Bayonet painted and based figures as I wanted to show something completely different from the normal knight in armour figures that are usually used in SB. I hope you like it.

Tony

Tuesday, 18 January 2022

Flintloque/Silver Bayonet cross over - part twenty three

This is another one of my Flintloque/Silver Bayonet miniatures. A converted Ursa Major bear 102 from the HeroClix Captain America set.

The model was mounted on to a 2p coin with the groundwork built up with Milliput and additional texture added with sieved stones and sand applied over PVA glue.

The bear was painted in a much darker 'black bear' colour scheme and varnished with Galleria matt varnish before the base was decorated with static grass and tufts.


The final image shows the werebear alongside a Flintloque RifleOrc. The bear stands 50mm tall.

Tony

Friday, 14 January 2022

Flintloque/Silver Bayonet cross over - part twenty two

Another mini from my 'spares box' - this time a plastic ghost from a D&D box set.

I thought the model was a little too short so mounted the plastic figure on to a piece of thick plastic card and rebuilt the lower edge with Milliput. The base or groundwork was modelled from DAS and additional texture was added with sieved stones and sand applied over PVA glue.

The paint scheme was a simple white over pale grey with some light green washes on the lower edges.

The final image shows the finished model alongside a Flintloque mini. The ghost was mounted on a 35mm round wooden counter and stands 35mm tall.


Tony