Tuesday, 15 July 2008

Flintloque - Large Farm House part two



These three photos show the latest batch of work - not much to add to what has already been written , the joins are covered with torn paper, the roof sections are thin card and the wooden beams are balsa. More to follow soon.

Once the roof base had been finished (as you see here) I used expanding foam to fill the attic space - no real reason why, other than I had a part filled can of foam. The structure is now very strong. It has also changed shape! With the foam ballooning out the roof shape rather than remaining concave. It is my intention to model the thatched roof with DAS modelling clay as I have used this technique in the past.

Tony

Sunday, 13 July 2008

Flintloque - Large Farm House

A recent thread on The Miniatures Page (TMP) asked readers to identify some 15mm resin terrain - a house, a windmill, a Russian church and a large farm house etc. I realised that I had already produced a model of the Russian church and liked the other terrain pieces so much that I produced a couple of sketches in the hope that I could at some time use them as inspiration for some Flintloque terrain.

The sketches are reproduced here and readers can see that I do not produce huge amounts of detail - just enough to use as the basis of a model. The second sketch is a little more detailed as I wanted to condense the frontage of the main house as I felt it would be too large if produced as the original model.
.
The Work-in-Progress shots show the main structures cut from black foam board and the edges and joins reinforced with paper strips glued on with PVA glue. I use torn strips of paper as the joins will show up less. In addition some of the joins are further strengthened with dressmakers pins which I leave in and do not remove once the glue has set as recommended in some publications!

At this stage of construction the whole model is quite strong and does not flex, once the roof is added the structure will become even stronger.






The detail to the rear is still to be thought-through and although I know there will be an annex, the exact shape and positioning of the windows is yet to be decided upon. I would hope to add more WiP shots very soon, but as I have stated before some of my modelling projects are started and finished very quickly, while some go on for years. A good example of this is a regiment of Flintloque Dwarves that I have just finished they were first started well over a year ago and have been converted, based, painted, re-painted, converted and re-painted, before I settled down last week and forced myself to complete them. (photo to follow very soon).

For scale reference the door is 40mm tall by 20mm wide.

Tony
PS. The black foam board was given to me free of charge, by a student studying at the same university as my son - thank you Dean. This should prove to readers that modelling in this way can be very cheap!

Saturday, 12 July 2008

Flash Gordon - Sea Monster

Another addition to the Flash Gordon collection - this time a Sea Monster or Sea Lizardman! The base figure is The Abomination from the HeroClix Marvel (or DC) range of collectable miniatures and reminds me of the sea monsters or Titans from the TV series Stingray.



I purchased two from Waylands Forge about a year ago for £1.00 each and re-positioned the legs of this model to give it a different stance. In addition the loincloth was added with 'green stuff' before coating with PVA glue, undercoating with black paint and painting with acrylic paints. The base is a section of cork on to which the miniature was glued and later 'pinned'.

It is my intention to further modify the second miniature, however the scaly skin of the original is very difficult to reproduce! The miniature is just under 50mm tall and is mounted on to a 40mm round base.

Tony

Flash Gordon - Hooded Minion

The latest painted miniature is another re-based and re-painted Monster-in-my-Pocket plastic figure - the Mad Gasser (number 30). 'A creature that haunts the night and released strong, nauseating and paralyzing gas in to the homes of the innocent!'

I re-based the figure on to a small slab of slate - not my usual cork, but felt that the whole dynamics was wrong and re-based it on to a small section of cork - with the base built up with DAS modelling clay and sand.

The miniature was then coated with PVA glue and under coated with black acrylic paint. The painting itself was very easy - grey over black with the skin tones built up from Games Workshop Spearshaft Brown. The original miniature was painted dark blue and dark purple.

The rock was painted grey and drybrushed with light grey and white before being varnished with water based acrylic varnish and finally some static grass was added.

The Monster-in-my-Pocket miniature require very little clean up and suit my choice of 40mm miniatures very well. The Mad Gasser is mounted on a 40mm round base and stands 47mm tall.

Tony

Wednesday, 9 July 2008

My son has a First

My son has just been informed that he has successfully achieved his degree, a FIRST - BA (hons) Multimedia Design and Digital Animation at the University of Cumbria.

Well done and we are so proud of you.

Mum and Dad

Tuesday, 8 July 2008

Flash Gordon - Monkeyman

Another Monster-in-my-Pocket plastic figure. The Monkey Man (number 36). This was one of the very first Monster-in-my-Pocket figure I ever bought and I would say my favourite! I love the sculpting of the in-turned monkey feet, grass skirt and bobble hat!

The miniature was mounted on to a block of cork, which was in turn glued to a 40mm round base, The rest of the base was built up with DAS modelling clay and covered with fine sand and small stones before being undercoated with PVA glue. I painted the miniature with acrylic paints over a black undercoat and followed the original colour scheme.

The very dynamic pose has meant that any conversion work would be very apparent. I have at least one more similar figure, but I do not envisage converting it.

The model stands just over 46mm from head-to-toe or 60mm from the top of the arms to the base of the foot.

This particular miniature came with two other figures in a card backed blister pack from In-Store and cost £1.00 to £1.50. And according to the stats card, the Monkey Man regularly eats monkey brains!

Tony

Monday, 7 July 2008

Flash Gordon - Robot

Earlier today I read that the miniature manufacturer Wargames Supply Dump W.S.D. was to close for some months due to health issues with members of the family. I felt that as a small tribute I would up-load this photo of one of the companies classic robot sculpts.

The miniature comes as a multiple casting (5 pieces - head, body, two arms and a legs/track section) and was put together with super glue. The miniature was painted with acrylic paints over a black undercoat and gloss varnished. I was trying for a retro 'Lost in Space' look!

The figure is 46mm tall and mounted on a 40mm round base. The skirmish wargame Fantastic Worlds from Rattrap Productions uses a number of different robot Profiles in its rules, this particular robot is a Bodyguard Robot (Grade 2).

Tony