Wednesday, 13 April 2022

White Dwarf No.2 update


It's been a while, but I have eventually got around to framing my issue of White Dwarf No.2. the magazine was bought from a charity shop in Cirencester back in 2015 and has remained in a clear protective folder, in the attic ever since. For more information, see this earlier Blog post.

I have used a George (Asda) frame and some non-sticky tape to hold the magazine in place. At this moment it has pride of place on the upstairs landing, but I don't think Sue will allow it to remain there for long.....

Tony

Tuesday, 12 April 2022

Two More Wands

Following on from my earlier post I have had more fun modelling these two new wands. The first was made from an African Ebony carved spoon with lighter wood and resin inlays in the handle. This one is more Classical with a lot of Fantastic Beasts influence. There is a wooden dowel running through all of the handle and the chrome finale is a polished nut found in my tool box. the carving on the resin infill was copied from a Harry Potter wand.

The Ebony wand is 14 inches long.

  

The second wand is much more rustic. It was a plain stick picked up by my grandson when we visited the local park, I started trimming the bark away with my penknife, but later used my modelling tools to get a better finish. I have left the natural bark on the handle and trimmed it at a slight angle(as seen in many Harry Potter wands). The handle was finished with acrylic varnish and the shaft and handle were later polished with natural wax.

The Natural Bark wand is 14.5 inches long.


It's difficult for me to chose a favourite between these two as they are so different but I can confirm that they were great fun to make and finish.

Tony

Sunday, 10 April 2022

Flintloque/Silver Bayonet cross over - part thirty seven

I have chosen eight Flintloque miniatures and after adding some additional texture to the 2p bases, I have undercoated them with a grey spray rattle-can paint.


Not much to add or show at this moment, but I'll keep the Blog updated with progress on the Flintloque/Silver Bayonet project.

Tony

Friday, 8 April 2022

The Shrine, The Statue and The Monolith - Miniature Wargames issue 469

Issue 469 (May 2022) of Miniature Wargames has another terrain making article written by me - this time showing how I built and painted three free-standing pieces for the wargame table, A Stone Shrine suitable for Fantasy gaming, a Statue and a more modern Block Monolith. The inspiration came from a number of e-mails between John Treadaway (Editor of MW) and myself where John had suggested a series of smaller and free-standing models I could build for the magazine. Instead of three separate tutorials, I produced a single magazine article showing how I built and painted all three. For full details, see the magazine.

The three models are - this Stone Shrine built from a block of florist's cork bark and detailed with various bits and pieces found in my 'bits box' then painted with acrylics.

Next is this statue which uses a plastic figure from a Pirates of the Caribbean play set mounted on a scratch built plinth.

Finally, we have a plain Block Monolith modelled at a slight tilt and painted with techniques found on the internet.

All three can be found in the latest issue of Miniature Wargames - issue 469.


Tony

Wednesday, 6 April 2022

A Lucky Skip Find.....

I picked up these scraps of blue foam from a local skip. The skip was outside a house that was being re-modelled and there were quite a few pieces that I could have taken - these three scraps should be enough for my immediate modelling projects.

I had not come across this brand before - DOW ROOFMATE T50 90mm, but look forward to testing it out.


Tony

Monday, 4 April 2022

Flintloque/Silver Bayonet cross over - part thirty six

It's about time I started a new group of minis for my Flintloque/Silver Bayonet cross over project and I have chosen a Spanish force.

I picked up this box set many years ago - Spanish or Dark Elf Guerrillas, but upon opening the box I thought the miniatures looked too small and didn't fit in with what I was looking for. I'm sure I'll find a use for these, but for now it was back to the drawing board.....


This is a selection of metal figures from my 'spares box' and I've based them on to 2p coins with the groundwork built-up with Milliput. You can see where I have added small modifications to a couple of sculpts, but in the main they are 'standard' Alternative Armies Dark Elves or Ferach.

I'll be adding more texture to the bases soon and then it's onto painting.

Tony

Sunday, 3 April 2022

Boot Jacks



No model making this weekend, but I did get around to making two Boot Jacks or Welly Boot Pullers, one for Holly and one for Gary, The boot jack in the middle (with the green welly) was made for Sue last year. I have since been asked to make a few more and this weekend, I used some scrap wood to make the plain boot jack for Gary (he wanted it as a gift for a friend) and the footprint boot jack was for Holly (I think it is for Mal).

They are fun and simple to make, the finishing (sanding and waxing) takes the time.

Tony