Friday, 20 January 2017

BS2017 - Hammerhead Shark - part eight

At long last - the main mast has been fitted. I tapered a cocktail stick by sanding it with a sanding stick and glued it into a 1mm hole into the fore-deck.

The model is 154mm long, 50mm wide (across the head), 25mm wide (across the hull) and 75mm tall (to the top of the mast).

Once again, the hull has been painted with a filler and uPVA glue mix then sanded with fine abrasive pads to smooth out the small imperfections.


No comments: